nanit floor stand hack

You could also try a heavy-duty clamp from your local hardware store. Nanit bills the Multi-Stand as a stand you can use to bring the Nanit on the go to grandparents houses on trips etc.

Nanit Plus Review Smart Tech For Better Sleep 2021 Update

Nanit Floor Stand Users Guidepdf.

. This Floor Stand provides an overhead view of the crib without needing to be attached to the wall or ceiling. Disassemble the lamp including the socket and turn switch cut the power cable and discard. Place the multi-stand base on a level nightstand table or countertop.

Allow 15-30 seconds for Nanit to power on and connect to the Wi-Fi network. This weekend only SAVE 25 on the Newborn to Two Bundle which includes everything you need to be parenthood-prepared for your babys first two years. Open the Nanit app to view your camera and adjust the camera angle accordingly.

The lamp is 71 inches tall with the shade but is nearly 66 inches at the hole utilized for the turn switch. Plus with sleep tracking breathing motion monitoring and auto-memory capture included youll never miss a thingSleep Tre. We did exactly that.

We tried to do this for a little while between our downstairs playnap room and the bassinet upstairs. The Nanit Pro Camera Floor Stand lets you can see hear baby with stunning 1080p HD video and two-way audio no mounting needed. Use a bolt to mount the nanit base to the stand.

Go buy a mainstays floor lamp at your local Walmart for 767. Put a 14 hole in one of the ends that your hand would grasp to openclose the clamp and then attach the same way you would with a magnet. With practice you can even do it one handed with a sleepy baby in the other hand.

Nanit Floor Stand Users Guide. The Nanit Pro Camera Floor Stand Twin Pack is the perfect solution for monitoring two babies at once. Parents can easily pick up that stand and move it to get the perfect view of their baby.

The Floor Stand positions the Nanit in the overhead orientation allowing you to mimic where the Nanit would be if installed via wall mount. Easily switch between wall leaning and freestanding mode to position your Nanit camera above any crib or bassinet. Carefully run the power cable from the stand to the nearest wall outlet and plug it in.

Its a small 6-inch stand that positions the camera to face outward toward a crib. Use a 12 long bolt that is sized 14 - 20 and you can mount the multi-stand into the magnet and then onto anything metal. 2x Nanit Pro Cameras.

The Nanit Floor Stand works with any Nanit camera to give you a stunning overhead view of your baby and the included cable management allows you to keep loose wires away from curious little fingers. The Nanit Floor Stand is an attachment for the Nanit monitors that gives you the option to switch your view.

Irkme Ysduol5m